With the studies almost complete, I can now unveil the first gas mechanical loco in the FMW range. It will be a Gmeinder 15/18PS, inspired by the model preserved by the APPEVA, in Haute Somme, and exhibited in its museum: https://www.petittrainhautesomme.fr/le-musee/
General model specifications :
- Structure and frame in etched and chemically cut brass
- Details in lost-wax cast nickel silver
- Beam-type mechanical chassis made by folding for greater rigidity and ease of assembly, in etched and chemically cut nickel silver. Screw plate closure for easy assembly/disassembly of axles.
- Faulhaber type 1512u012s motor gearhead, with 112:1 reduction for scale speed, with 1:1 ratio primary transmission via stainless steel extension shaft and helical gears in steel and phosphor bronze, module 0.3. Self-centring helical transmission simplifies assembly
- Secondary drive to the second axle via turned brass pulleys and 1 mm round NBR belt
- Electric pick-up on all wheels via photoetched contact blades made of copper-beryllium, fixed to the mechanical chassis by screws and insulating washers
- 3-point suspension with grub screw on rear axle
- Nickel-plated brass wheels, insulated, NMRA standard RP25-Code 110, stainless steel axles
- Rivet and bolt inserts in turned brass
- Laser-cut real wood bench
- DCC ready (card with power reserve and Plux16 connector) and 8 ohm loudspeaker
- Sub-assemblies assembled using M1.6 torx or hexagon socket screws
All the lost-wax nickel silver foundries have been supplied, as have all the mechanical parts. All that remains to be done is to start manufacturing the photo-etched plates and the DCC circuits. I hope to be able to assemble a first validation prototype next February.
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_00.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_9.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_1-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_2-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_3-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_4-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_5.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_6.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_7.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_8.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_13.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_14.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_15.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_16.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_17.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_18-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_19-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_20-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_21-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_22-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_23-1024x819.png)
![](https://www.francksmodelworkshop.com/wp-content/uploads/Gmeinder_24-1024x819.png)